Introduction to the laureate of the ECASIA Award 2026
10.20–11.20
PLENARY LECTURE
Hendrik Bluhm (ECASIA award laureate)
11.20–11.30
To rooms
11.30–12.30
Thin films and coatings (Studio 4)
11.30–11.50
ALD Cr2O3 layers for corrosion protection of Al alloys: an XPS, ToF-SIMS and electrochemical study Philippe Marcus, Raul, Xueying Wang, Mathilde Michaux, Jhonatan Rodriguez-Pereira, Sandrine Zanna, Antoine Seyeux, Jan Macák, Dimitri Mercier
11.50–12.10
Surface and Interface Characterization of ALD-Grown Ultrathin Oxides on Hybrid Perovskites by XPS and HAXPES Yanis Pisi, Elodie, Abdul Khaleed, Thomas Riedl, Cedric Kreusel, Marcus Bär, Regan Wilks, Nathanaelle Schneider, Mathieu Frégnaux, Muriel Bouttemy
12.10–12.30
Study of the densification of TiO2 film deposited by atmospheric dielectric barrier discharge plasma Nicolas Fosseur, Didier Robert, Loïc Malet, Stéphane Godet, François Reniers
11.30–12.30
Technique development and metrology (Studio 1)
11.30–11.50
Evaluation of high-energy-resolution spectrum imaging by a fast hemi-spherical analyzer (f-HSA) Tatsuya Uchida, Noboru Taguchi, Fuyuki Nabeshima, Konomi Ikita, Akihiro Tanaka, Kazushiro Yokouchi, Toshiyuki, Kenichi Tsutsumi
11.50–12.10
Multimodal Characterization of Polymer Surface Crystallinity using Scanning Helium Atom Microscopy and Cluster SIMS Naoko Sano, Jack Kelsall, Kate McHardy, Paul Blenkinsopp, David J Ward, Paul C Dastoor
12.10–12.30
Advances in Electron Spectroscopy for Characterizing GaN-Based HEMTs
Kirène Gaffar, Solène Bechu, Guillaume Monier, Romain Jouanneaud, Christine Robert-Goumet, Anna Krystianiak, Olivier Heintz, Arnaud Etcheberry, Farid Medjdoub, Gilles Patriarche, Muriel Bouttemy
11.30–12.30
Biomaterials engineering and analysis (Studio 5)
11.30–11.50
Interfacial Analysis of ExoPolymeric Substance (EPS) Adsorption on Chromium by Coupled QCM–ARXPS Sandrine Zanna, Julien Jaume, Alexandre Alves, Dimitri Mercier, Jean Guezennec, Philippe Marcus
11.50–12.10
Reactive landing of peptides on tailored surfaces using gas cluster ion beams Mehdi Lakhdar, Benjamin Tomasetti, Christine Dupont-Gillain, Arnaud Delcorte
12.10–12.30
Enzymatic Surface Nanostructuring of Biopolymer-Silica Hybrid Materials Alexia Etchecopar, Cecile Courreges, Sophie Nolivos, Regis Grimaud, Nagore Gabilondo, Joachim Allouche
11.30–12.30
Surfaces of porous materials (Studio 2)
11.30–11.50
Sustainable carbon membranes made from lignin with autonomously formed pore structure Jiří Duchoslav, Rene Zahrhuber, Christoph Unterweger, Christian Fürst, David Stifter
11.50–12.10
Fractographic Analysis of Al–Si High-Pressure Die Castings in Mega Casting Applications Maria Margarita Mitsi, Johan Ahlström, Lars Nyborg, Yu Cao
12.10–12.30
Synthesis of mesoporous TiO2 diphosphonate for 5-HMF production: From sol–gel nanoparticles to mesoporous catalyst Chandana Chandran, Richa Tomer, Nick Gys, Apostolos Fanourgiakis, Anthony Morena, Carmela April, Sophie Hermans, Tom Hauffman, Vera Meynen
12.30–14.00
Lunch
14.00–15.30
Thin films and coatings (Studio 4)
14.00–14.30
KEYNOTE
Exchange of thiol containing molecules in chemisorbed monolayers: a XPS and ToF-SIMS study Kathrin Küster, Sabrina Steffens, Tolga Acartürk, Ulrich Starke, Hagen Klauk
14.30–14.50
Contact Electrification at Silica-Gold Interface in Ultra-High Vacuum Nisha Ranjan, Tolga Acartürk, Kathrin Küster, Ulrich Starke
14.50–15.10
Rapid thermal annealing of amorphous GeSe2-Bi2Se3 thin films and waveguides Anupama Viswanathan, Youssef Ghandaoui, Jan Gutwirth, Tomas Halenkovic, Stanislav Slang, Joel Charrier, Petr Nemec, Virginie Nazabal
15.10–15.30
Fabricating High quality superconducting NbN thin film by radio frequency reactive magnetron sputtering Dushyant Dabhi, Emila Panda
14.00–15.30
Machine learning in surface science; Technique development and metrology (Studio 1)
14.00–14.30
KEYNOTE
Domain Expertise as the Key to ML-Driven Corrosion Insights: A SECCM Case Study on 316L Leonardo B. Coelho, Daniel Torres, Aleksei Makogon, Frédéric Kanoufi, Viacheslav Shkirskiy, Jon Ustarroz
14.30–14.50
ML-framework for deconvolution in X-ray Photoelectron Spectroscopy Loay Akmal Madbouly, Alexander Kister, Jibin James, Vasile-Dan Hodoroaba, Jörg Radnik
14.50–15.10
Intensity-energy response function of Al/Cr-K Rémi Lazzari, David Alamarguy, Damien Aureau, Thierry Conard, Nicolas Gauthier, Frédéric Georgi, Stéphane Guilet, Samar Hajjar-Garreau, Olivier Heintz, Guillaume Rémi Monier
15.10–15.30
An interlaboratory study on a test material for the evaluation of area selection fidelity in small-area XPS measurements Jörg Manfred Stockmann, Thomas Weimann, Sebastian Bütefisch, Vasile-Dan Hodoroaba, Jörg Radnik
14.00–15.30
Biomaterials engineering and analysis (Studio 5)
14.00–14.30
KEYNOTE
Grafting of anti-adhesive polydentate polymers onto gold surface Anouk Galtayries, Thomas Smagghe, Stephanie Deville-Foillard
14.30–14.50
Interaction of protein-functionalized silica with f-block elements using surface analysis Vanele Audrey Tsapi Metchop, Diane Rebiscoul, Fabrice Giusti, Michael Odorico, Nicolas Bremond, Philip Gutfruend, Antoine Leydier, Robert Winkler, Catherine Berthomieu
14.50–15.10
Effect of Salicylic Acid Treatment on Human Keratinized Skin Investigated by XPS Cluster Depth Profiling
Adel Sarolta Racz
14.00–15.30
Surfaces of porous materials (Studio 2)
14.10–14.30
Plasma-Engineered rGO Surfaces: Nitrogen and Oxygen Functionalization Toward pH-Responsive Membrane Behavior Monika Stupavská, Richard Krumpolec, František Zelenák, Tereza Rybová, Jianyu Feng, Jana Jurmanová, Zdenĕk Moravec, Jan Muselík, Michaela Kuchynka, Mirko Černák
14.30–14.50
Investigating Cs-implanted graphite using dual-source XPS supported with DFT Alex Theodosiou, Ben F Spencer, Abbie N Jones
14.50–15.10
Quantitative XPS Analysis of Electronic Inhomogeneous Samples Maximilian Franz, Reinhard Denecke
15.10–15.30
Adsorbate‑Selective Diffusion Modulation in TMA‑Modified ZIF‑8 Nick Gys, Margot Verstreken, Leen Boullart, Kristof Marcoen, Tom Hauffman, Rob Ameloot
15.30–16.00
Coffee break
16.00–17.30
Corrosion (Studio 4)
16.00–16.30
KEYNOTE
Control of stiction phenomena at the rotor/pad interface in automotive braking systems Francesco Andreatta, Michele Motta, Agusti Sin, Lorenzo Fedrizzi
16.30–16.50
Femtosecond Laser Ablation (fs-LA) XPS Depth Profiling for the Study of Oxidation and Prevention of Wear Mark A Baker, Charlie W Chandler, Tony T Fry, Stefanie Hoja, Oliver Parlour, Joseph Tegile, Tim S Nunney
16.50–17.10
Analysis of Sodium Phosphate as a Corrosion Inhibitor for Grey Cast Iron Brake Discs in Automotive Applications
Michele Motta
17.10–17.30
Functionally graded corrosion resistant coatings on Ti-6Al-4V for biomedical implant applications Kartikey Chaturvedi, Priya Mahato, Emila Panda
16.00–17.30
Technique development and metrology (Studio 1)
16.00–16.30
KEYNOTE
Testing the Consistent Retardation Assumption for XPS transmission function determination
Neal Fairley, Pascal Bargiela, Vincent Fernandez, Hannah Levene, Olivier Heintz, Robert W Hengstebeck, Muriel Bouttemy, Solene Bechu, Yusuf Koçak, Guillaume Sauthier, Anna Kallistova, David Morgan, Huanyong Li, Isidoro Lopez Marin, Anna Krystianiak, Jonas Baltrusaitis, Ryan Thorpe, Christopher J. Kliewer, Timothy A. Livingston Large, Aurélien Renard, David J. H. Cant, Benjamen P. Reed, Alexander G. Shard
16.30–16.50
Developing a tiered approach to reviewing and reporting XPS data and results
Donald R Baer
16.50–17.10
New methods for XPS depth profiling using femtosecond laser ablation Tim S Nunney, Paul Mack, Charlie W Chandler, Mark A Baker
17.10–17.30
Resolving Interface-Driven Properties in hybrid materials by Correlative XPS, AES and ToF-SIMS Analysis
Joachim Allouche
16.00–17.30
Biomaterials engineering and analysis (Studio 5)
16.00–16.30
KEYNOTE
Cryo-XPS analyses of membrane vesicles from bacterial cells
Kateryna Hrimanova, Andrey Shchukarev, Madeleine Ramstedt
16.30–16.50
Mapping Surface Topographies in Biofilms Using Neutral Atom Microscopy
Nick A von Jeinsen, Jack Kelsall, Ben J Butler, David J Ward, Katherine A Brown, Paul C Dastoor
16.50–17.10
Cost effective corrosion resistant and biocompatible coatings for Ti-6Al-4V biomedical implant Sarmistha Bhattacharjee, Priya Mahato, Emila Panda
16.00–17.30
Heritage and geology (Studio 2)
16.00–16.30
KEYNOTE
A Study of the chemistry of Mary-Rose timber hull core samples using XPS and ToF SIMS Marie-Laure O C Abel, Eleanor Schofield, Alastair Miles, Darcey Holmes, Wiktor Kawala, Michael Absolon, John Watts
16.30–16.50
Using XPS to Determine Iron Oxidation State in Metamorphic Fe-Ti-oxides, Adirondack Mts, New York Jennifer E Mann, David Valley, Kateryna Artyushkova, William O. Nachlas, John W. Valley
16.50–17.10
Marble Waste Reuse for Wastewater Treatment: a Contribution of XPS Enrica Tuveri, Deborah Biggio, Nicola Careddu, Bernhard Elsener, Giulio Casula, Marzia Fantauzzi, Antonella Rossi
17.30–19.30
Opening reception
08.55–09.50
Studio 4
08.55–09.00
Welcome
Tom Hauffman (chair of ECASIA 2026)
09.00–09.50
PLENARY LECTURE
Electronic Structure and Depth-Resolved Chemical State Analysis of Functional Materials by Laboratory XPS and HAXPES
Claudia Cancellieri
09.50–10.00
To rooms
10.00–11.00
Catalysis (Studio 4)
10.00–10.20
Characterizing Nickel state in Oxide-Free Nickel- Nitrogen Compounds: A Comparative XPS, XRD, and TEM Study Alex Bondarchuk, Aleksandr Kryshtal, Rosalía Cid, Elvira Paz, André Fonseca, Lifeng Liu
10.20–10.40
Titanium sulfide-based 2D nano(photo-)catalysts under reactive conditions
Niko Kruse, Marc Kobbenbring, Justin Klimek, Aaron R. von Seggern, Martin Hedevang, Sergi C. Jara, Jeppe V. Lauritsen, Lars Mohrhusen
10.40–11.00
Tuning TiO₂/AlInP Interfaces by Surface Preparation and ALD Chemistry for Unassisted Photoelectrochemical Applications
Negin Mogharehabed, Mohammad Amin Zare Pour, Christian Höhn, Oleksandr Romanyuk, Helene Reichel, Alexander Klyushin, Roel van de Krol, Thomas Hannappel, Agnieszka Paszuk
10.00–11.00
Thin films and coatings (Studio 1)
10.00–10.20
Chemisorption-driven superlubricity on engineering steel enabled by nitrogen-doped graphene nanosheets Irfan Nadeem, Matjaž Finšgar, Mitjan Kalin
10.20–10.40
XPS Depth Profiling of Multilayer Stacks using Femtosecond Laser Ablation (fs-LA) Charlie W Chandler, Dhilan S Devadasan, Robin Simpson, Paul Mack, Tim S Nunney, Mark A Baker
10.40–11.00
An influence of flux on reflow melting of the tinplated steel Erdni Batyrev, Ruud Pattiasina, Arnoud de Vooys, Quinten Hekelaar, Michel Meinders
10.00–11.00
Technique development and metrology (Studio 5)
10.00–10.20
Non-Destructive Characterization of Film Thickness and Fractional Coverage Utilizing XPS and StrataPHI Kateryna Artyushkova, Norb Biderman, Amy Ferryman
10.20–10.40
Effect of ambient humidity on scanning electrochemical cell microscopy measurements Luiza Zudina, Alexander S. Darsow, Ariba Aziz, Vaishali Shrivastav, Simon Sprengel, Weishan Wu, Wojciech Nogala, Dmitry Momotenko
10.40–11.00
On the Application of Ambient SKPFM for Surface Electrochemical Studies
Reynier Revilla
10.00–11.00
Semiconductor materials (Studio 2)
10.00–10.20
Quantitative study of ion beam-enhanced reactivity of MoS2 Francesco Laudani, Markus Sauer, Annette Foelske
10.20–10.40
Surface Analysis of GaN After Ar Ion Irradiation Takahiko Ikarashi, Chizuru Asahara, Sara Mizuno, Haruka Hidaka, Shinya Yazaki, Hideaki Mizusaki, Tomohiro Sakata
10.40–11.00
pARXPS investigations of HCl-deoxidized InP surfaces exposed to different atmospheres Georges Al Hoyek, Victor Lumineau, Virginie Loup, Bernard Pelissier
11.00–11.30
Coffee break
11.30–12.30
Energy storage and conversion (Studio 4)
11.30–11.50
Accelerating Advanced Materials Innovation in the age of Artificial Intelligence
Mesfin Haile Mamme
11.50–12.10
Developing Cost effective low-Emissivity coating as energy saving window Priyanka Hemani, Emila Panda
12.10–12.30
The role of oxygen in the degradation of the Cu(InxGa1-x)Se2 solar absorber
Anna Gagliardi, Jean-Jacques Gallet, Fabrice Bournel, Arnaud Etcheberry, Jean-François Guillemoles, Muriel Bouttemy, Solene Bechu
11.30–12.30
Thin films and coatings (Studio 1)
11.30–11.50
Interfacial Oxidation-State Control in ALD-Based CeOx/WO₃ Heterostructures Dominic Guttmann, Rudi Tschammer, Carlos Morales, Małgorzata Kot, Michał Mazur, Damian Wojcieszak, Paulina Kapuścik, Wiktoria Kołodzińska, Jarosław Domaradzki, Jan Ingo Flege
11.50–12.10
Determining oxidation state via Auger line shape analysis: Defect engineering of ALD-SnOx films for ambient H2 sensing Rudi Tschammer, Dominic Guttmann, Carlo Tiebe, Karsten Henkel, Carlos Morales, Jan Ingo Flege
12.10–12.30
Correlative surface analytics of ultrathin Ti-based conversion layers on pretreated hot-dip galvanized steel Martin Regnat, Jiri Duchoslav, Georg Mayr, Bernhard Strauss, David Stifter
11.30–12.30
Technique development and metrology (Studio 5)
11.30–11.50
Cryo-XPS Characterisation and Advancing Solution-Representative Analysis of Functional Nanoparticles Liam Soomary, Simon Hutton, Chris Blomfield
11.50–12.10
High Sensitivity Analysis of Reflection Electron Energy Loss Spectra Using Spectrum Image Konomi Ikita, Fuyuki Nabeshima, Tatsuya Uchida, Akihiro Tanaka, Noboru Taguchi, Toshiyuki Ohama, Kazushiro Yokouchi, Kenichi Tsutsumi, Junichi Fujita
12.10–12.30
Unveiling the Water/Solid Interface in Low-Carbon Cements through Cryo-XPS Isidoro López, Yannick Demeusy, Sandrine Gauffinet, Christophe Labbez
11.30–12.30
Semiconductor materials (Studio 2)
11.30–11.50
Nondestructive Analysis of Al2O3/SiOx/Si Passivation Layers for Photovoltaics Using Angle-Resolved HAXPES Techniques Hsun-Yun Chang, I-Chia Huang, Ting-Jia Yang, Taiga Hirota, Wei-Chun Lin, Shin-ichi Iida
11.50–12.10
Study of time-resolved photoemission dynamics in semiconductor materials for photovoltaic cells Margaux Le Coq, Mathieu Frégnaux, Philip Schulz, Mathieu SILLY, Damien Aureau
12.10–12.30
Extended study of Metal / p-HgCdTe Interface combining HAXPES and ToF SIMS analysis Alexandra Colas-Reuillon, Marc Veillerot, Clément Lobre, Eugénie Martinez, Sarah Petit, Olivier Gravrand
12.30–14.00
Lunch
14.00–15.30
Energy storage and conversion (Studio 4)
14.00–14.30
KEYNOTE
Operando SIMS to Monitor Degradation in Solid-State Batteries Pascal Dippell, Johannes Hubl, Sascha Kremer, Johannes Schubert, Johannes Westphal, Maximilian Kissel, Janis K. Eckhardt, Juergen Janek, Marcus Rohnke
14.30–14.50
Unveiling reactivity differences between Cd and Te faces in CdTe(111) by coupling XPS photopeaks and X-AES transitions Antonin Frappreau, Arnaud Etcheberry, Pauline Derory, Muriel Bouttemy, Solène Béchu
14.50–15.10
Operando XPS: A novel approach to study sulfide based all solid-state-batteries in realistic condition Giulia Serafino, Xinhua Zhu, Guillaume Dolphijn, Annick Hubin
15.10–15.30
Engineering Sodiophilic Interfaces with Sputtered Thin Films for Anode-Free Sodium Batteries
Lorenzo Fallarino, Mert Yalçınöz, Miren de Lasén, Yan Zhang, Rosalía Cid
14.00–15.30
Catalysis (Studio 1)
14.00–14.30
KEYNOTE
Surface and Interface Analysis as a Key to Understanding ZnFe2O4@TiO2 Direct Z-Scheme Photocatalysts for CO2 Reduction Samar Al Jitan, Axel Breugelmans, Pegie Cool, Vera Meynen
14.30–14.50
U–Ce charge transfer in ceria-uranium mixed oxide: implications for thermochemical water splitting Carlos Morales, Rudi Tschammer, Thomas Gouder, YongMan Choi, Hicham Idriss, Jan Ingo Flege
14.50–15.10
Reaction of Reduced Ti-Centers with N₂O in Hetero- & Homogeneous Coordination: From Oxides to Organometallic Environment Justin Klimek, Filip Hallböök, Niko Kruse, Fangliang Li, Sara Blomberg, Malte Fischer, Katharina Al-Shamery, Lars Mohrhusen
15.10–15.30
Correlating Surface Science and Catalysis Data: Enantioselective Hydrogenation, Deoxygenation and Olefin Metathesis Peter H McBreen, Sonali Balasaheb Khomane, Yi Dong, Tianchi Zhang
14.00–15.30
Technique development and metrology (Studio 5)
14.00–14.30
KEYNOTE
A multiple X-ray beam approach for angle-resolved photoelectron analysis of dielectric thin film stacks Anja Vanleenhove, Ilse Hoflijk, Thierry Conard
14.30–14.50
Microscopic Origins of Surface Loss in Thin Silicon Nitride Membranes: A Multi-Technique Profiling Approach Antonius Armanious, Gunnar Jeschke, Arnold Müller, Artur Glavic, Claudia Cancellieri, Nicola Cavalleri, Premysl Marsik, Geena Benga, Ariane Giesriegl, Silvan Schmid, Lars Jeurgens, Alexandar Eichler
14.50–15.10
Applications of Spectrum Imaging Using a Fast Hemispherical Analyzer (f HSA) Noboru Taguchi, Tatsuya Uchida, Fuyuki Nabeshima, Konomi Ikita, Akihiro Tanaka, Kazushiro Yokouchi, Toshiyuki Ohama, Kenichi Tsutsumi
14.00–15.30
Metals (Studio 2)
14.10–14.30
Applications of XPS in an industrial production environment
Kevin Ploner
14.30–14.50
Quasi in situ monitoring of GaAsSb Plasma Surface Preparation Ali Ahmad, Nicolas Coudurier, Hervé Boutry, Bernard Pelissier
14.50–15.10
Effect of Microstructure and Surface Orientation of Cu Substrate on Interfacial Reaction in Cu Sinter Bonding Process Jun Hyeong Yoon, Minki Kim, Hyun-Soon Park, Min-Su Kim
15.10–15.30
Determination of oxide-layer-thickness on ~50 µm high-alloyed steel spheres by use of XPS Jakob Rath, Alexander Holzer, Markus Sauer, Francesco Laudani, Christian Gierl-Mayer, Annette Foelske
15.30–16.00
Coffee break
16.00–17.00
Energy storage and conversion (Studio 4)
16.00–16.20
Cryo ToF-SIMS to Study Sodium Transport and Storage in Hard Carbon Anodes
David Schäfer, Pascal Dippell, Alexander Weiß, Lysander Wagner, Bernd Smarsly, Thomas Demuth, Kerstin Volz, Anja Bielefeld, Jürgen Janek, Marcus Rohnke
16.20–16.40
Probing surface reactivity of carbon group anodes for sodium-ion batteries by XPS and SEM
Tim Michel, Romain Jouanneaud, Noah Keim, Anu Adamson, Anass Benayad
16.40–17.00
In situ XPS investigation of the lithium/solid electrolyte interfaces in all-solid-state batteries Rémi Dedryvère, Lucía Pérez Ramírez, Jonas Sottmann, Benjamin Hennequart, Muath Radi, Lenart Dudy, Jean-Pascal Rueff, Maxime Hallot, Christophe Lethien
16.00–17.00
Catalysis (Studio 1)
16.00–16.20
Ce-Induced Nanodefect Engineering and Electronic Regulation for Efficient CO2 Electroreduction to Formate over Bi2O2CO3 Jichuang Wu, Young Dok Kim
16.20–16.40
Effect of Pt Decoration and its Thickness on Catalytic Properties of Cu–Zn Electrocatalysts Tsubasa Kemmizaki, Taguchi Hirohisa
16.40–17.00
Revealing the Impact of pH on Nanoscale Hydrogen Evolution Catalysis via Operando Optical Microscopy Nikan Afsahi, Zhu Zhang, Manas Ranjan Panda, Mainak Majumder, Naimeh Naseri, Jean-François Lemineur, Frédéric Kanoufi
16.00–17.00
Technique development and metrology (Studio 5)
16.00–16.20
A combined Hyperspectral Imaging – Multivariate Analysis approach to surface analysis Markus Sauer, Florian Fahrnberger, Jakob Rath, Francesco Laudani, Markus Ostermann, Pierluigi Bilotto, Carsten Gachot, Edoardo Marquis, Marko Piljevic, Annette Foelske
16.20–16.40
Operando ORP-EIS/ATR FTIR for real-time monitoring of interfacial degradation of coatings under cathodic polarization Zahra Jiryaeisharahi, Benny Wouters, Peter Visser, Herman Terryn, Annick Hubin, Tom Hauffman
16.00–17.00
Metals (Studio 2)
16.00–16.20
In situ XPS analysis of iron oxide reduction for hydrogen detection in advanced high-strength steels Benedikt Wolfsjäger, Tom Rak, Jiri Duchoslav, Philipp Kürnsteiner, Reza Sharif, Thomas Steck, David Stifter, Heiko Groiss
16.20–16.40
Stretch Induced Evolution of Gallium Oxide in Liquid Metal Interconnects in flexible stretchable electronic devices Parth Sewlikar, Lennert Purnal, Maximilian Krack, Rathul Nengminza Sangma, Wim Deferme, Monika Rai, Seppe Terryn, Bram Vanderborght, Iris De Graeve, Tom Hauffman
16.40–17.00
Mitigation of chromium release in high-temperature heat exchangers via alumina-forming Ni-based alloys Ruben del Olmo Martinez, Vik Haesen, Kitty Baert, Vanina Cristaudo, Luk Dedene, Ali Koruk, Yves De Vos, Tom Hauffman
17.00–19.30
Poster session
08.55–09.50
Studio 4
08.55–09.00
Welcome
Tom Hauffman (chair of ECASIA 2026)
09.00–09.50
PLENARY LECTURE
The need for speed in adsorbent evaluation: Rapid measurements of multicomponent isotherms and kinetics
Rob Ameloot
09.50–10.00
To rooms
10.00–11.00
Technique development and metrology (Studio 4)
10.00–10.20
Disentangling Beam-Induced Artefacts in Chemically Amplified Resist ToF-SIMS and OrbitrapTM-SIMS Depth Profiling Judith Widart, Rita Tilmann, Anna Kotowska, David Scurr, Claude Poleunis, Arnaud Delcorte, Danilo De Simone, Alexis Franquet, Claudia Fleischmann
10.20–10.40
Study of ion transmission in OrbiSIMS to detect molecular structure
Margaret Moloney
10.40–11.00
Correlative XPS and SEM/EBSD with Cluster Ion Etching for Enhanced Surface Preparation Simon Bacon, Helen Oppong-Mensah, Robin Simpson, Paul Mack, Tim Nunney
10.00–11.00
Thin films and coatings (Studio 1)
10.00–10.20
Analysis of superhydrophobic biopolymer coatings through combination of green chemistry and laser texturing Pieter Samyn, Patrick Cosemans, Olivier Malek
10.20–10.40
Fluorinated Silane Layers on SiO₂: Surface Coverage and Thermal Stability Probed by Combined LEIS and XPS Stanislav Průša, Samira Jafari, Matthew Linford, David Slovák, Pavel Bábík, Tomáš Šikola
10.40–11.00
Effect of C5 insulating coatings on the fatigue performance of adhesively bonded electrical steel stacks Thomas Luger, Gernot Wallner, Martin Rosner, Michael Pock
10.00–11.00
Nanomaterials and nanostructuring (Studio 5)
10.00–10.20
Relationship between the dry surface state of CuO nanopowders and its zeta-potential in solution Lars P.H. Jeurgens, Anastasia Batenkova, Eric Hirschman, Claudia Cancellieri, Patrik Schmutz
10.20–10.40
Electrostatic Assembly of Silver Micro/Nano Hybrids for Low Temperature Die Attach Sintering below 200 °C Jin Goo Kim, Min Su Kim
10.40–11.00
Reliable Tof SIMS Depth profiling of Hybrid nanomaterials via Reactive high-energy per molecule Oxygen GCIB sputtering Giuseppe Ragusano, Marcus Rohnke, Alessandro Auditore, Nunzio Tuccitto, Alberto Bossi, Marta Penconi, Antonino Licciardello, Valentina Spampinato
10.00–11.00
Corrosion (Studio 2)
10.00–10.20
Development of High quality functionally graded coating (FGC) on Ti-6Al-4V as biomedical implant Sarmistha Bhattacharjee, Priya Mahato, Emila Panda
10.20–10.40
How Late Can Corrosion Inhibitors Be Released? Local inhibiting layer formation and re-immersion stability
Marlon Mopon, Arjan Mol, Santiago J. Garcia
10.40–11.00
A computer vision approach for linking outdoor surface wetting states to atmospheric corrosion sensor signals Vincent Vangrunderbeek, Leonardo Bertolucci Coelho, Mats Meussen, Herman Terryn, Mesfin Haile Mamme
11.00–11.30
Coffee break
11.30–12.30
Technique development and metrology (Studio 4)
11.30–11.50
Use of XPS-CREM for detecting hydration-driven changes in the electrical conductivity of La2Ce2O7 thin films
Daniel Freidzon, Hadar Dessau, Ayelet Vilan, Hagai Cohen, Ellen Wachtel, Anna Kossoy, David Ehre, Isaac Abrahams, Igor Lubomirsky
11.50–12.10
X-Ray Photon Electron Spectroscopy degradation study on insulating samples Fernandez Vincent, Hekking Sarah, Counsell Jonathan, Maheu Clément, Granier Agnès, Goullet Antoine, Stafford Luc, Richard-Plouet Mireille, Fairley Neal
12.10–12.30
Combined XPS and HAXPES for Overlayer Analysis David J. H. Cant, Benjamen P. Reed, Jonathan D.P. Counsell, Anna Matiushkina, Robin Schuermann, Joerg Radnik, Ute Resch-Genger, Alexander G. Shard
11.30–12.30
Thin films and coatings (Studio 1)
11.30–11.50
Van der Waals interactions as driving forces in interphase formation of polymer thin films Dorothee Silbernagl, Özlem Özcan
11.50–12.10
XPS characterization of artificial saliva droplets on common substrates: the role of surfactants Rosaria Anna Picca, Daniele Remoli, Nicola Cioffi, Zhenyu Jason Zhang
12.10–12.30
XPS and Hydrogen Permeation Analyses of Nanostructured Multilayer Coatings Deborah Biggio, Bernhard Elsener, Orlaw Massler, Marzia Fantauzzi, Antonella Rossi
11.30–12.30
Nanomaterials and nanostructuring (Studio 5)
11.30–11.50
Operando X-ray Photoemission Microscopy: Unveiling the Energy Landscape of 2D Material–Based Devices Debora Pierucci, Dario Mastrippolito, Mariarosa Cavallo, Erwan Bossavit, Pavel Dudin, Jose Avila, Emmanuel Lhuillier
11.50–12.10
Direct Visualization of Buried Surface Chemistry in the van der Waals Gap between Graphene and Platinum by In Situ SEM
Sayed Hossein Mirdamadi Khouzani, Rui Wang, Jiri David, Tianle Jiang, Yanming Wang, Karel Vareka, Michal Dymacek, Petr Babor, Tomas Sikola, Miroslav Kolibal
12.10–12.30
Quantitative and spectral analysis of electron transmission through stacked bi-layer graphene
Giorgio Orlandini, Florian M. Brunbauer, Domenica Convertino, Neeraj Mishra, Camilla Coletti, Ulrich Starke, Eraldo Oliveri, Marcel Himmerlich
11.30–12.30
In-situ and near ambient pressure analysis (Studio 2)
11.30–11.50
XPS of wet samples: past, present and future Andrey Shchukarev, Madeleine Ramstedt
11.50–12.10
What is the Role of Water in the Electrochemical Double Layer of Emersed Electrodes? Adèle Debono, Cristiano Kasdorf Giesbrecht, Martin Stratmann, Michael Rohwerder
12.10–12.30
Soft X-ray Spectroscopy of Spinel Oxides for Photocatalytic Water Splitting David C Grinter, Charlotte Hall, Pilar Ferrer, Santosh Kumar, Matthijs A van Spronsen, Ricardo Grau-Crespo, Georg Held
12.30–14.00
Lunch
14.00–15.10
Energy storage and conversion (Studio 4)
14.00–14.30
KEYNOTE Depth-resolving the pSEI formation and Redox Mechanims of Delithiated NMC 811 Electrodes by Lab-Based Soft and Hard XPS Yanis Jugie, Roberto Fantin, Mohammed Raghibi, Ambroise Van Roekeghem, Renaud Bouchet, Anass Benayad
14.30–14.50
ToF-SIMS for the analysis of interfaces in liquid and solid state Li-ion batteries Cecile Courreges, Karama Ghamgui, Abdelfettah Lallaoui, Muath Radi, Antonin Gajan, Remi Dedryvere, Herve Martinez
14.50–15.10
Operando XPS with Coupled Mass Spectrometry on Dual Electrolyte Solid-State Batteries
Leonardo Merola, Joachim Sann, Sebastian L L Benz, Felix H Richter, Linda F Nazar, Jürgen Janek, Burak Aktekin
14.00–15.10
Thin films and coatings (Studio 1)
14.00–14.30
KEYNOTE
Characterization of Ultrathin ALD-Grown VSₓ Films for Electrical Contacts to MoS₂
Gabriel Prado Da Silva, Nicolas Gauthier, Stéphane Cadot, Gianluca Ciatto, Hubert Renevier
14.30–14.50
Thermal stability of engineered Al oxide layers on an AM Al-Fe-Zr alloy Rene Pfister, Noemie Ott
14.50–15.10
How Sub-nm Binary Oxide Overlayers Shape Surface Dipoles, Thermochemical Stability & Morphology of (La,Sr)CoO3-d Florian Fahrnberger, Matthäus Siebenhofer, Michael Hahn, Markus Sauer, Annette Foelske, Gernot Friedbacher, Herbert Hutter, Markus Kubicek
14.00–15.10
Nanomaterials and nanostructuring (Studio 5)
14.00–14.30
KEYNOTE
Electrochemical Additive Manufacturing of Sub–100 nm Metals via Chemical Focusing Dmitry Momotenko, Karuna Aurel Kanes, James L. Mead, Marie Claussen, Peng Zeng, Luiz Morales, Vita Solovyeva
14.30–14.50
Reliable Workflows for the elemental analysis of Grapehene-Related 2D Materials with SEM/EDS and XPS
Paul Mrkwitschka, Vasile-Dan Hodoroaba, Jörg Radnik
14.50–15.10
Electrochemical probing of the radiation damage caused by an electron beam Suzanne Delfosse, Souheil Mourtada, Daniel Torres, Aleksei Leontev, Juliette Zveny, Alejandro Gomez-Perez, François Reniers, Jonathan Quinson, Jon Ustarroz
14.00–15.10
In-situ and near ambient pressure analysis (Studio 2)
14.00–14.30
KEYNOTE
An evolution in standard operando surface chemical analysis Paul M. Dietrich, Emilie Gérouville, Andreas Thissen
14.30–14.50
Multimodal Submicron IR microscopy for Comprehensive Materials Characterization Carolin Borbeck, Miriam Unger
14.50–15.10
Monitoring reversible surface modifications of SrMoO₃ thin films by combining laboratory and synchrotron NAP-XPS Rosinel Alfonzo, Mathieu Frégnaux, Bruno Berini, Yves Dumont, Vincent Polewczyk, Pardis Simon, Damien Aureau
15.10–15.40
Coffee break
15.40–17.00
Energy storage and conversion (Studio 4)
15.40–16.00
Lithium transport from operando microscopy
Monica Mead, Nadine Kerner, Roham Talei, Yug Joshi, Guido Schmitz
16.00–16.20
XPS investigation of trapping functionalities in Li-ion batteries Bruna Canu, Margarita Bosmi, Alexis Martin, Dominique Foix, Christel Laberty-Robert, Rémi Dedryvère
16.20–16.40
Role of Functional Binder PEDOT:PSSTFSI in Cathode-Electrolyte Interface Formation on LiFMP Electrodes of Li-ion Battery Delphine Flahaut, Ivone Marselina Nugraha, Jacob Olchowka, Cyril Brochon, Rafael Bianchini Nuernberg, Éric Cloutet, Laurence Croguennec
16.40–17.00
Guide to Improving XPS Analysis for Studying the SEI in Li-ion Batteries Audunn Elvarsson, Sofia Reiner, Julia Maibach
15.40–17.00
Thin films and coatings (Studio 1)
15.40–16.00
Layer-by-layer growth of copper-based SURMOFs on functionalized SiO₂: a comprehensive surface characterization study Alessandro Auditore, Valentina Spampinato, Roberta Ruffino, Alexis Franquet, Nunzio Tuccitto, Antonino Licciardello
16.00–16.20
From Oxide Dissolution to SAMs: Mechanistic Insights into NHC Adsorption on Naturally Oxidized Copper Mathilde Michaux, Dimitri Mercier, Dominique Costa, Sandrine Zanna, Antoine Seyeux, Salem Ba Sowid, François Ribot, Louis Fensterbank, Philippe Marcus
16.20–16.40
A complementary approach to the interfacial studies between organosolv lignin and aluminium oxide Jan Derhaeg, Görkem Eylul Kaya, Niko Van den Brande, Benjamin Wilson, Mari Lundström, Tom Hauffman, Iris De Graeve
16.40–17.00
The role of topcoat curing on the adhesion of UV-cured primers Libby Ward, Marie-Laure Abel, Mark Baker, Charlie Chandler, John Watts
15.40–17.00
Nanomaterials and nanostructuring (Studio 5)
15.40–16.00
Engineering Silica Capsules via Pickering Emulsion Templating: Advances in Porosity and Surface Functionality
Duclos Rémi, Lofficial Dina, Proriol David, Dalmazzone Christine, Lerouge Fréderic
16.00–16.20
Revealing Distributed Kinetics in Electrochemical Nucleation and Growth through Local Electrochemistry Daniel Torres, Jon Ustarroz
16.20–16.40
Nanoscale Observation of Ag Nanowire Growth at the Step Edges of Atomically Flat Si(111) Surface Az Zahrah Fitriana Syafira, Hana Kyouda, Naoko Momono, Kouji Inagaki, Kenta Arima
16.40–17.00
Advanced Glass Surfaces: Optical, Wetting, and Biological Control via Texturing and Chemistry
Wageesha Senaratne
15.40–17.00
In-situ and near ambient pressure analysis (Studio 2)
15.40–16.00
Operando APXPS Reveals Distinct Wet and Dry Carbonation Pathways of Ca(OH)2 Anna Stedt, Xiangrui Kong, Romana Viktoria Szakal, Maria Arizaleta, Raoul Blume, Jean-Francois Boily, Erik Thomson, Zareen Abbas
16.00–16.20
Size- and shape-dependent reactivity: a NAP-XPS study of Cu2O nanoparticles as model catalysts Michele De Rocco, Sylvain Cristol, Pardis Simon, Héloise Tissot
16.20–16.40
Oxidation behaviour of model 304 stainless steel exposed to water vapour at 500°C: An in situ XPS study Sudharsan Sundar, Frédéric Wiame, Vincent Maurice, Philippe Marcus
16.40–17.00
Microfluidic Chip for In Situ Surface Mass Spectrometry Shadi bazazordeh, Thomas Reichert, Alexis Franco, Laurane Lamouline, Claude Poleunis, Ioulia Tzouvadaki, Arnaud Delcorte
19.00
Conference dinner
08.55–09.50
Studio 4
08.55–09.00
Welcome
Tom Hauffman (chair of ECASIA 2026)
09.00–09.50
PLENARY LECTURE
Interpreting Thin Film Characterization Using AI-enhanced Atomistic Modeling
Vladyslav Turlo (Young Plenary Lecture Award)
09.50–10.00
To rooms
10.00–11.00
Energy storage and conversion (Studio 4)
10.00–10.20
Fatigue crack growth kinetics of PV relevant laminates based on polyolefinic encapsulants and tinned copper substrates Gernot M Wallner, Florian Fenyvesi, Gabriel Riedl
10.20–10.40
Advances of secondary ion mass spectrometry metrology in battery applications Yundong Zhou, Rudra N. Samajdar, Mina Jung, Rita Tilmann, Andrew J. Wain, Mauro Pasta, Alexis Franquet, Ian S. Gilmore
10.40–11.00
Femtosecond Laser Ablation (fs-LA) XPS Depth Profiling of Lithium-Ion Batteries Matthew Houchell, Charlie Chandler, Daniel Commandeur, Mark Baker, Paul Mack, Dhilan Devadasan
10.00–11.00
Semiconductor materials (Studio 1)
10.00–10.20
Enlarged chemical characterization of III-V material heterostructures for advanced communication devices
Guy Tsamo-Tagougue, Eugénie Martinez, Franck Bassani, Mickael Martin, Thierry Baron, Vincent Thoréton, Marc Veillerot
10.20–10.40
High sensitivity, in situ analysis of hydrogen using dynamic SIMS Paula Peres, Seoyoun Choi, Kilian Soulard, Jinlei Ren, Céline Defouilloy, Flore Barbier, Aurélien Thomen, Anne-Sophie Robbes, Emmanuel Camescasse
10.40–11.00
Monitoring of Wafer Contamination in European Research Facilities: An Interlaboratory Field Study Annika Franziska Wandesleben, Nicole Nagy, Ivan Madarevic, Heini Saloniemi, Delphine Truffier-Boutry
10.00–11.00
Corrosion (Studio 5)
10.00–10.20
Passivation and Corrosion of AlCoCrFeNi HEA Revealed by Hard and Soft XPS
Pei-Chen Huang, Po-Chih Chu, Ting-Jia Yang, Wei-Chun Lin
10.20–10.40
Quantitative and Time-Resolved Low Energy Ion Scattering of Thin Oxide Film Growth on HEA
Marcus Valtiner
10.40–11.00
Selective Oxidation of Low Cu and Cu Enriched EAF Steels: A Combined SEM–XCT Study Amal Chethimattam Abraham, Joseph Kish, Andre Phillion
10.00–11.00
Modelling (Studio 2)
10.00–10.20
Atomistic Insights into Surface Reactivity: From Thermochemical Energy Storage to Catalysis and Biomineral Interfaces
Frederik Tielens
10.20–10.40
Facet- and defect-dependent adsorption of toluene on CeO2 surfaces: a DFT study
Amanda Fernandes Gouveia, Monica Calatayud
10.40–11.00
XPS–REELS Analysis and KMC Modeling: Toward Controlled Organization and Chemical Composition of InGaN Droplets on GaN Hydrice Dylane Nzomo, Guillaume Monier, Luc Bideux, Alberto Pimpinelli, Christine Robert-Goumet, Simon Falvard, Emmanuel Gardes
11.00–11.30
Coffee break
11.30–12.30
Energy storage and conversion (Studio 4)
11.30–11.50
Probing the Local Electrochemistry of Li-ion Batteries Using Scanning Electrochemical Cell Microscopy Xinhua Zhu, Joan Roca Busacker, Rodrigo Lopez Baez, Oussama Maach, Daniel Brussels Torres Morillo, Stanislav Trashin, Annick Hubin, Jon Ustarroz
11.50–12.10
Accurate quantification of transition metal ratios in battery materials using combined XPS and HAXPES Benjamen P Reed, Yves Ménesguen, Sascha Nowak, Sofia Marchesini, Alexander G Shard, Andrew J Wain
12.10–12.30
Surface interaction of hydrogen isotopes with native iron oxide studied by ToF-SIMS Minli Chen, Dimitri Mercier, Antoine Seyeux, Sandrine Zanna, Theodorus De Bruin, Gaurav Joshi, Dominique Costa, Philippe Marcus
11.30–12.30
Semiconductor materials (Studio 1)
11.30–11.50
Wafer-Scale Metrology of buried layers by XPS/HAXPES and Multi-Energy Glancing-Angle XRF Emmanuel Nolot, Carmen Prieto O’Mullony, Yann Mazel, Elouan Le Cun, Julien Patouillard, Paul Dietrich, Andreas Thissen, Messaoud Bedjaoui, Rémy Gassilloud
11.50–12.10
Quantification of the reduction of sputter deposited vanadium oxide under XPS analysis conditions Hannah Levene, Spyros Stathopoulos, Andreas Tsiamis, Peter Lomax
12.10–12.30
XPS study on β-aluminum-gallium oxide: composition, bandgap, and substrate dependence Lukas Schewe, Jana Rehm, Ming-Chao Kao, Vedran Vonk, Zbigniew Galazka, Saud Bin Anooz, Andreas Popp, Carlos Morales Sánchez, Raquel Sánchez-Barquilla, Jan Ingo Flege
11.30–12.30
Corrosion (Studio 5)
11.30–11.50
Effect of hydrogen on the native oxides of steels Chiara Menegus, Jan Kollender, Andreas Borgschulte, Lars P.H. Jeurgens, Claudia Cancellieri
11.50–12.10
Unveiling the correlation of heat treatment pathway with passivity of additive manufactured Ni-Fe-Cr-based alloy 718 Arshad Yazdanpanah, Reynier Revilla
12.10–12.30
Role of Microconstituents in Corrosion of Water-Saturated Supercritical CO2 Containing NO for Pipelines Transportation Mahdiyeh Mallahi Karai, Minkang Liu, Yimin Zeng, Joey Kish
11.30–12.30
Modelling (Studio 2)
11.30–11.50
Defect mediated surface modification of TiO2 surface using Grignard reagent in explicit solvation model Krithika Ganesan, Erik C Neyts
11.50–12.10
Why Zinc is a good Barrier for Hydrogen Andreas Kretschmer, Markus Valtiner
12.10–12.30
Prediction of in-service behavior of aerospace aluminum alloys Mats Meeusen, Nourhan Abdelrahman, Rene Böttcher, Herman Terryn, Mesfin Haile Mamme
12.30–14.00
Lunch
14.00
Excursion
08.55–09.50
Studio 4
08.55–09.00
Welcome
Tom Hauffman (chair of ECASIA 2026)
09.00–09.50
PLENARY LECTURE
Adsorption at the Atomic Scale: Unraveling Surface Interactions Through Theory and Experiment
Dominique Costa
09.50–10.00
To rooms
10.00–10.40
Technique development and metrology (Studio 4)
10.00–10.20
Hard X-ray photoelectron spectroscopy with photon energy up to 40 keV for characterization of deeply buried interfaces Satoshi Yasuno, Okkyun Seo, Yasumasa Takagi, Shinichi Komaba
10.20–10.40
Quantification challenges of binary compounds using Hard X-ray Photoemission Spectroscopy (HAXPES) Mario Ghostine, Olivier Renault, Nicolas Gauthier, Rémi Lazzari
10.00–10.40
Biomaterial engineering and analysis (Studio 1)
10.00–10.20
Surface chemistry of Lipid Nanoparticles polymorphic transitions induced by -80 °C freeze-thaw cycle Francesco Fumagalli, Maximilian Huber, Julia Klüpfel, Carmen Pedri, Jessica Ponti, Giuditta Guerrini, Henry Dehne, Natalia Ivleva, Dora Mehn
10.20–10.40
Interfacial Reactivity of ZnO-coated 3D Titanium Scaffolds Samantha Soulé, Malobi Seth, Flora Lemaire, Halima Kerdjoudj, Marius Colin, Laurent Weiss
10.00–10.40
Semiconductor materials (Studio 5)
10.00–10.20
Growth of In0.3Ga0.7N nanodots droplet epitaxy on GaAs(111)A monitored by in situ XPS and ex situ microscopy
Romain Jouanneaud, Guy Tsamo Tagougue, Luc Bideux, Hydrice Dylane Nzomo, Alberto Pimpinelli, Simon Falvard, Emmanuel Gardes, Mamour Sall, Christine Robert-Goumet, Guillaume Monier
10.20–10.40
Surface and Bulk Characterisation of Organic Semiconductors Using X-ray and Ultraviolet photoemission spectroscopies Adam Roberts, Jonathan Counsell
10.00–10.40
Polymers (Studio 2)
10.00–10.20
XPS fs-laser depth profiling of polymer materials and polymeric samples Robin E Simpson, Tim Nunney, Charlie Chandler
10.20–10.40
Efficiency and UV stability of interference-pigmented thermoplastic encapsulants for double-glass photovoltaic modules
Martin Huemer, Matthias Posch, Gernot M Wallner, Andreas Brandstaetter
10.40–11.10
Coffee break
11.10–12.10
Technique development and metrology (Studio 4)
11.10–11.30
When HAXPES gets vertical: sidewall-specific lab-scale analysis of GaN LED pixels after plasma etching Olivier Renault, Sandra Kozuch, Simon Ruel, David Vaufrey
11.30–11.50
Using Auger Electron Spectroscopy to Advance Nanoscale Characterization
Cesar Saucedo
11.50–12.10
Multi Dimensional Electron Energy Spectroscopy: Rapid Scan Auger Electron Spectroscopy Development for Next Generation Kenichi Tsutsumi, Konomi Ikita, Fuyuki Nabeshima, Tatsuya Uchida, Kazushiro Yokouchi, Akihiro Tanaka, Toshiyuki Ohama, Noboru Taguchi
11.10–12.10
Biomaterial engineering and analysis (Studio 1)
11.10–11.30
Surface-Functionalized Nanoparticles for Amplified QCM Detection of Listeria monocytogenes Chloé Richet, Delphine Larose, Philippe Trossat, Thérèse Leblois, Vincent Humblot
11.30–11.50
Development of a microfluidic separation device to recover CD34+ stem cells Paul K. M. Sarpong, Agathe Figarol, Thérèse Leblois, Vincent Humblot
11.10–12.10
Semiconductor materials (Studio 5)
11.10–11.40
KEYNOTE
Surface and Interface Study of ENEPIG Metallization on AlSiCu Pads for SiC Power Devices Valentina Spampinato, Alessandro Auditore, Anna Bassi, Antonino Licciardello
11.40–12.00
A Digital Workflow for Sulfur 2p XPS Materials Analysis Hira Tauqeer, John Anderson McLeod, Jeffrey Daniel Henderson, Mark Carl Biesinger
11.10–12.10
Polymers (Studio 2)
11.10–11.30
Fluorine Quantification in Polymer Matrices via TOF-SIMS: Supporting Compliance with Emerging EU PFAS Regulations Elmar Gull, David Ken Gibbs, Herbert Hutter, Andreas Limbeck
11.30–11.50
Impact of PDMS molecular weight and crosslinker functionality on mechanical and surface properties of soft PDMS networks Mathieu Bugaut, Sophie Bistac, Maurice Brogly, Olivier Noël, Luc Prieur, Christophe Fond, Jaroslav Lukes
11.50–12.10
Gadolinium sorption on chitosan: an XPS investigation
Giulio Casula, Nicolò Aramu, Bernhard Elsener, Antonella Rossi, Marzia Fantauzzi
12.10–12.40
Best Oral and Poster contribution award
12.40
Lunch and goodbye
Last update on 27 May 2026. The programme might be subject to necessary changes.
